Buy Corny Keg
This article is written with the beginner in mind to help demystify the corny keg by providing some background information, explaining its anatomy and function, and examining some advantages of using them.
buy corny keg
Today, the corny keg is obsolete in the soft drink industry and has been largely replaced by the drink fountain syrup bag-in-box, yet it continues to thrive in home brewing. Many brewers prefer pre-used soft drink kegs as a reliable, cost-efficient alternative to new kegs that are more expensive. Refurbished older tanks are becoming scarce on the market and sell quickly when they appear.
The corny keg is a stainless steel upright cylindrical tank with rubber gaskets constructed to hold pressurized liquid up to a maximum of 130 psi. It is 8.5 or 9 inches in diameter and from 22 to 25 inches tall, minus the draught line and gas line quick disconnects. It comes in a variety of sizes, including 2.5, 3, 5, 10, and 15 gallons. An empty 5-gallon corny keg weighs roughly 10 pounds and a little over 50 pounds when filled.
The first is selecting a brewing system and all its components. You can avoid the time-consuming action of washing and sterilizing bottles and filling them by using your corny keg. No more worry about your drink not tasting the same a few days later. You know what you need in your home.
One of the key pieces of equipment is a keg. With the right keg, you make the best beer possible without having to struggle with bottles or cleaning for hours. A corny keg is a right and comfortable solution if you are looking for the perfect keg that fits your needs.
An o-ring is a circular piece of material, often silicone or rubber, but also sometimes plastic or even metal. In a corny keg, it circles around the bottom lip of the lid and rests beneath the top lip of the large central opening of the keg. When the keg is pressurized, the pressure causes the o-ring to be squeezed between the tiny opening that is left between the lid and the keg, which seals the opening and prevents both liquid and gas from escaping the keg.
Note that outer o-rings for pin locks are slightly larger than those for ball locks. If you purchase a specialized set of o-rings for corny kegs, then it will likely come with two different sized o-rings to go on the outside of the posts, and the slightly larger one is for pin lock kegs.
O-rings should be replaced on an as-needed basis. If you buy a used corny keg, make sure that it does not leak. If it does leak, there is a good chance that the leak is caused by a faulty o-ring, and the o-rings should be replaced.
Replacing o-rings is a very simple process. All you have to do is take the old rings off and put new rings in their place. O-Rings often come in sets of 5 for corny kegs, so if you buy them in sets, it might be a good idea to go ahead and replace all of them at once.
Did I leave something out? Is there anything else about o-rings that people with corny kegs should know? If so, please let me know in the comments below. This IS supposed to be the ultimate guide to o-rings for corny kegs, after all.
An o-ring is a circular piece of material, often silicone or rubber, but also sometimes plastic or even metal. In a corny keg, it circles around the bottom lip of the lid and rests beneath the top lip of the large central opening of the keg. When the keg is pressurized, the pressure causes the o-ring to be squeezed between the tiny opening that is left between the lid and the keg, which seals the opening and prevents both liquid and gas from escaping the keg. In addition to the main o-ring that circles the lid, there are also smaller o-rings that seal both the gas-in post and the liquid-out post. Each post has two o-rings, one small one on the outside of the post, and an even smaller one on the inside of the post.
If you do not keg your beer already, someday you almost certainly will. It is a superior package for the home brewer. They save time and they feel cool. Only downside is they are not portable. Cornelius kegs, or corny kegs for short, are a widely available means for home brewers to package their beer. Generally they hold 5 gallons. Most of the ones home brewers use were formerly soda kegs. Beyond the keg itself, a CO2 tank, regulator, gas in line, gas in connector, beer out connector, and a beer line + picnic tap are needed to complete the setup.
After a while, this started to become tedious and I knew that I needed to upgrade to a corny keg. I have to admit it, I was a little nervous about the idea of upgrading. Firstly, there was the price tag - was I able to justify this expense? Next, and probably my biggest concern, was the ability to get my hands on CO2 easily. Here in the U.K, you can't just buy CO2 over the counter from your average store. You need to get it from accredited places and in my experience, its not a simple process.
There are two types of corny kegs; Pin locks and Ball Locks. As soft drinks corporations formerly used them, Pin lock corny kegs were produced for Coca-Cola; In contrast, Ball Lock was produced for Pepsi. Despite the difference between dimensions, lid styles, and posts, they still function the same as corny kegs.
Because of this, these corny kegs were not able to keep up to date until they were disused by these companies. Although it was said that it was out of date, some homebrewers kept their kegs as they believed that their corny kegs were better than bottling.
It is obvious that the smallest gallon of sanke is equivalent to the largest gallon of a corny keg given their size differences. The data, keg sizes, and volume differences are shown in the table above.
Homebrewers who enjoy creating their own beer found it to be much simpler due to the size of the corny keg. With a five-gallon capacity, it is ideal for people who want to skip bottling the beer and drink it straight from the barrel. For a corny keg, 40 16-oz pints and 53 12-oz bottles can be created.
There are two types of corny kegs which are the ball-lock and pin-lock kegs. As they were used before by Coca-Cola and Pepsi, it is guaranteed that these kegs are exceptional. Below is a video by WNY Brews discussing the difference between Pin Lock and Ball lock:
Sanke kegs are barrels that are used for commercial uses, while corny kegs are great for homebrewers. The main distinguishing characteristic between the two is that the sanke keg has no removable lid! This made it impossible to use at home since you will need special types of equipment to open it. 041b061a72